check_circleIntegrated Connectivity — No WiFi required
check_circleWeatherproof & UV-stable
check_circleLock function
check_circleInstaller-friendly design
check_circleBuilt-in safety systems (PEN & DC protection)
check_circleIntegrated cable management
check_circleRemote updates & assistance
check_circleManufactured in the UK
Make the Switch, the Smarter Way
electric_car
Compatible with Most UK Homes & EVs
Type 2 connector, compatible with all Type 2 electric vehicles.
Delivers reliable 7.4kW charging from a standard 32A single phase supply—ideal for
overnight use, with multiple charging modes to take advantage of off-peak energy rates.
Type 2 Plug
7.4kW
32A
ev_station
Designed Differently
Stay connected without WiFi with free built-in cellular connectivity, charge with ease using a 7m cable, and enjoy remote updates that keep everything running smoothly over time.
Cellular Connectivity
7m Cable
Remote Updates
language_gb_english
Proudly British
UK manufactured and locally supported, independently tested by BSI, and engineered to
withstand the demands of British weather.
Made in Britain
UK Support
BSI Approved
build
Faster, Simpler Installation
Built for efficient installation, featuring integrated PEN fault protection (no earth rod
required) and DC leakage detection, enabling the use of a Type A RCD. Pre-drilled entry
points help speed up installation. Eligible for OZEV grants - Residential (renters, flat owners, on-street parking, landlords) and Commercial (workplace charging scheme).
Unit 1 Waterfall Mill
Queen Victoria Street
Blackburn BB2 2QG
Frequently Asked Questions
Search below for answers to yours questions.
search
Yes. The Xplug A1 uses the industry-standard Type 2 connector, making it compatible with all major electric vehicle brands currently sold in the UK, including Tesla, BMW, Volkswagen, Audi, Nissan, Hyundai, Kia, Jaguar, and more.
Yes. Any EV with a Type 2 port is fully compatible. For vehicles with a Type 1 port, a Type 1 to Type 2 adapter is required, available from most EV accessory retailers.
Absolutely. The Xplug A1 works with all plug-in hybrid vehicles that use a Type 2 charging port, which covers the vast majority of PHEVs sold in the UK.
Yes. All EV charger installations in the UK must be carried out by a qualified and registered electrician. The Xplug A1 must be installed by an OZEV-approved installer for the warranty to be valid and to comply with UK building regulations.
No. The Xplug A1 includes built-in PEN fault protection, which eliminates the need for an earth rod in most standard UK domestic installations, reducing installation time and cost.
Yes. The Xplug A1 is IP55 rated for water and dust ingress, making it fully suitable for outdoor wall mounting in all typical UK weather conditions.
A standard installation typically takes between 2 and 4 hours. This may be longer if additional cabling runs or consumer unit upgrades are required.
Yes. The Xplug A1 is OZEV approved. Eligible renters and flat owners can claim up to £350 off the cost of installation through the UK government EV chargepoint grant.
PEN fault detection monitors the Protective Earth and Neutral conductor for faults. Built-in PEN protection removes the requirement for a separate earth rod during installation and provides an additional layer of electrical safety for your home.
DC leakage detection monitors for unintended direct current leakage in the charging circuit. Having this built into the charger means a lower-cost Type A RCD can be used at the consumer unit rather than the more expensive Type B RCD required without it.
Yes. The Xplug A1 carries an IP55 rating, providing protection against water jets from any direction and against dust ingress. It is designed and tested for outdoor installation in the UK climate.
Yes. The Xplug A1 includes built-in safety protections for overcurrent and over-temperature. If the charger detects an unsafe condition it will shut down safely to protect your vehicle and home electrical system.
The Xplug A1 uses built-in 4G cellular connectivity. Unlike WiFi-only chargers, the A1 does not rely on your home network, ensuring smart features remain active even if your broadband drops or if the charger is installed in a garage with poor WiFi signal.
No. The Xplug A1 includes cellular connectivity as part of the product with no additional SIM or subscription cost required.
The A1 uses multi-carrier 4G to connect via whichever mobile network has the strongest signal at your location. In areas with very limited coverage, our support team can advise on alternative connectivity options.
The Xplug A1 delivers up to 7.4kW on a standard single-phase 32A circuit. This adds approximately 25-30 miles of range per hour, meaning most EV batteries can be fully charged overnight.
The Xplug A1 offers Instant Mode (charges immediately at full power), Delay Mode (starts at a scheduled time you set, ideal for off-peak tariffs), and Smart Mode (automatically manages charging based on grid conditions and energy costs).
Yes. Using Delay Mode, you can schedule charging to begin at any time you choose, allowing you to take advantage of cheaper overnight electricity tariffs such as Octopus Go or EDF GoElectric.
Yes. The Xplug A1 is solar compatible. When used alongside a compatible solar energy system, you can configure the charger to prioritise solar generation for greener, lower-cost charging.
Yes. All modern EVs communicate with the charger through the Type 2 connection. Once the vehicle battery management system signals it is full, the charging session ends automatically.
Yes. The Xplug A1 includes a built-in cable locking mechanism. You can lock the cable to the charger using a PIN pattern set via the control buttons, preventing theft or unauthorised disconnection.
If you forget your lock pattern, a factory reset will clear it. Please refer to the factory reset section of your user manual, or contact our support team who can walk you through the process.
Yes. Remote lock and unlock is available through the Xplug app, allowing you to secure or release the cable from anywhere.
The Xplug A1 comes with a 3-year manufacturer warranty covering defects in materials and workmanship when installed by a qualified installer.
The warranty covers manufacturing defects and hardware failures under normal use. It does not cover damage caused by improper installation, physical damage, or unauthorised modifications. Full terms are available in the warranty documentation supplied with the product.
Warranty registration can be completed through your Xplug account at xplug.co.uk after installation. Your installer should provide you with the serial number required for registration.
You can reach our UK-based support team by email at support@xplug.co.uk, by phone on 0330 010 0559, or via WhatsApp on the same number. We are available Monday to Sunday, 8am to 8pm.
Orders placed before 2pm on a working day qualify for free next-day delivery. Orders placed after 2pm or on weekends will be dispatched the following working day.
Yes. Free next-day delivery is included on all Xplug A1 orders to UK mainland addresses.
Yes. You can return the charger within 30 days of delivery provided it is unused and in its original packaging. Chargers that have been installed cannot be returned. Please contact our support team to arrange a return.
